Interchangeable Watchbands

If you purchased a kit from us...

Step 1: Look at the picture of the watch band {provided in your kit}

and lay the beads out just like the picture displays.
**Make sure your spacers {center pieces} are even**

Step 2: Grab your string and you'll start on the Right side of the band.
Start with the 2nd bead from the Claw.{this is where you'll end and hide the knot}

**When you get to the first Claw... make sure you face the others the same way**

Step 3: Once you have strung all of the beads and gotten all the way back around to your starting point, you will tie a surgeon's knot.

Chore Chart Tutorial

Supplies Needed:

Desired Paint Color

Ribbon for Haning

Metal Glue {E6000}

Sand Paper {Optional}

Mog Pog or Clear Glue

Step 1: Paint the board allow to dry completely. {Rough up edges if desired}

Step 2: Apply Vinyl to Metal

              -Cut vinyl out in sections {Chores, To Do/Done & Line, Bottom Line}

              -Pull backing off, make sure vinly letters stick to transfer paper and apply to metal

Step 3: Once the board is completely dry, glue metal to board 

               using a strong metal glue {E6000}

Step 4: Cut out pictures for magnets and glue them to glass tiles

              -Cut just inside the black lines

              -Place a small dot of glue in the middle of the picture and press the 

               glass tile {rough side down} on top

             -After the paper has dried, glue the magnet to the back of the paper using your 

               metal glue {E6000}

Step 5: Hang using your choice of ribbon and the scroll provided.